Catch Basin Repair

Your Solution for Catch Basin Repairs

Catch basins remain a constant area requiring repair because of freeze-thaw cycles, which causes the basin to heave or settle. These repairs can usually be corrected easily with the removal or addition of an adjustment ring. These rings will bring them back to the proper elevation to allow for proper drainage.

If the asphalt around the basin becomes cracked or broken, AC Asphalt Specialists
will saw cut, remove, and replace the asphalt around the basin to remove the damaged area.

There are occasions when the asphalt is either heaved or settled, and the water does not drain properly. The use of an infra-red treatment should never be used, especially on catch basin repairs. These repairs do not expose the problem that caused the damage, thus eliminating the ability to correct base, adjustment ring, cracked laterals, or washout voids. This procedure also eliminates asphalt cement out of the original material making it more apt to deteriorate at a faster than normal rate.

If a basin has completely failed and a new basin is required, we must rely on the assistance of a licensed sewer contractor to repair or replace.

For a FREE quote, call (920) 865-7279 for storm drain and catch basin repairs.